Product ID:ITW RAMSET/RED HEAD EPCON SYSTEM GRANITE 5-RESIN
MSDS Date:08/21/1992
FSC:6850
NIIN:00F039869
Kit Part:Y
MSDS Number: CFBQL

ITW PHILADELPHIA RESINS CORP

130 COMMERCE DR
MONTGOMERYVILLE, PA 18936-5000
US

Emergency Phone: 215-855-8450

Info Phone: 215-855-8450

Cage: ITWPH

ITW PHILADELPHIA RESINS

454 MONTGOMERYVILLE, PA 18936 US

Telephone: 508-777-1100

Cage: ITWPH

BISPHENOL A DIGLYCIDYL ETHER RESIN, EPOXY RESIN, EPON 820,

CAS: 25068-38-6

RTECS: KD4380000

Fraction By Weight: 30-60%

EPOXY RESIN

Fraction By Weight: 1-10%

CATALYST AMORPHOUS SILICA *95-1*

CAS: 67762-90-7

Fraction By Weight: 1-5%

GLASS, OXIDE *95-1*

CAS: 65997-17-3

Fraction By Weight: 5-10%

CALCIUM CARBONATE, DOMOLITE, LIMESTONE, WHITING

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 30-60%

ACGIH TLV: 10 MG/CUM (DUST)

LD50 LC50 Mixture:ORAL LD50(MOUSE): 15.8 G/KG EPOXY RESIN
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: RESIN IS MODERATELY IRRITATING &
MAY CAUSE SENSITIZATION. EYES: MODERATE TO SEVERE IRRITANT.
INGESTION: LOW ORDER OF ACUTE ORAL TOXICITY.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, RASHES, HIVES.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN & EYE DISORDERS.

First Aid:EYES: IMMEDIATELY FLUSH W/PLENTY OF WATER FOR 15 MINS. SKIN:
WIPE EXCESS FROM SKIN & FLUSH W/PLENTY OF WATER FOR 15 MINS. USE
SOAP/FOLLOW BY WASHING W/SOAP & WATER. INHALATION: REMOVE TO FRESH
AIR & G IVE OXYGEN IF NEEDED. INGESTION: DON'T INDUCE VOMITING.
OBTAIN MEDICAL ATTENTION IN ALL CASES. NOTE TO PHYSICIAN: IN
GENERAL, EMESIS INDUCTION IS UNNECESSARY IN HIGH VISCOSITY/LOW
VOLATILITY PRODUCTS.

Flash Point:>250F
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:USE SCBA & PROTECTIVE CLOTHING

Spill Release Procedures:AVOID PERSONNEL CONTACT. TAKE UP W/ABSORBENT
MATERIAL. PLACE IN A SUITABLE CONTAINER FOR WASTE DISPOSAL.

Handling and Storage Precautions:STORE IN A COOL, DRY PLACE W/ADEQUATE
VENTILATION. HANDLE IAW THE HAZARD POTENTIAL OF CURING AGENT.
Other Precautions:KEEP AWAY FROM OPEN FLAME & HIGH TEMPS. AVOID SKIN
CONTACT & BREATHING OF VAPORS.

Respiratory Protection:DUSK MASKS SHOULD BE WORN DURING ANY
GRINDING/MACHINING PROCEDURES ON CURES RESINS.
Ventilation:LOCAL EXHAUST SHOULD BE USED IN CONFINED AREAS/WHERE VAPOR
CONCENTRATION EXCEEDS TLV'S LIMIT.
Protective Gloves:CHEMICAL/IMPERVIOUS RUBBER/PLASTIC
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:CLEAN LONG LEG & SLEEVED CLOTHING.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH THOROUGHLY AFTER HANDLING & BEFORE SMOKING/EATING/USING
FACILITY
Supplemental Safety and Health

Spec Gravity:1.65
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE PASTE W/MILD EPOXY ODOR
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS & STRONG LEWIS/MINERAL ACIDS.
Stability Condition to Avoid:OPEN FLAME, HIGH TEMPS.
Hazardous Decomposition Products:CO2, CO, ALDEHYDES & ACIDS
(TOXIC/CORROSIVE)

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.